Sand making equipment for sand making production line, Suit the remedy to the case
Doing any thing, choosing one article, which obey the line - Suit the remedy
to the case. Sand making equipment is used for sand making production line.
Brief introduction of the sand-making production line:
The raw materials are first put into elementary-crushing machine for crush,
then the belt conveyor transfers the elementary products to the
secondary-crushing machine for secondary crush. The secondary products will be
separated into two kinds by the vibrating screen. The parts satisfying the
standard of the Vertical Shaft Impact Crusher will be conveyed to the
sand-making machine and the other parts will return to the secondary-crushing
machine. The parts into the sand-making machine will be the finished products
after being washed in the sand-washing machine. The other parts will be for the
secondary crush.
HXJQ design and produce a full set of sand production line equipment used for
hard limestone, granite, basalt, river gravel, slag and other materials. For
high efficiency and best profits, we provide the most professional design of
sand making plant. Until now, our machines have been sold and exported at home
and abroad. Not only in the quality of sand, but also in the energy saving, HXJQ
have been at an international leading level.
For all businessmen and any enterprise, it's the commom wish to make great
benefits with low costs. We are the professioanl manufacturer of stone crushing
line, jaw crusher, impact crusher, cone crusher, hammer crusher etc. How
to set a high quality stone crushing line with low costs to achieve the
goal.
Stone production line
generally consist of feeding equipment, crushing equipment( Crusher equipment
for sale ), transportation equipment, screening equipment, how to choose the
crusher type to achieve Low investment, high productivity, and the stone out
size , grain shape Meet the requirements of the quarry, which kind of crusher we
should use ,can reach all this requirements?
Generally speaking, sand production line consists of feeding equipment,
crushing equipment, screening equipment and transport equipment, and they are
general-purpose equipment, no too much difference in basically, but still have
to take the characteristics of the material into account, when select the
machine, should pay attention to the element of water capacity, hardness,
material size, especially the request of capacity per hour. A variety of styles
crusher because of its own different characteristics, their expertise also
different, such as jaw crusher is suite for crushing some hard stone, opposite,
not only over skill, but also the final product beyond the standard. The common
crushing machines to be used in stone crushing line are jaw crusher, impact
crusher and cone crusher.
Currently, the main screening machines wildly used in stone crushing line are
Circular and linear vibrating
screen, of which, circular vibrating screen is most common vibrating
machine. The vibrating screen is mainly used for powder and granular materials
selection and classification, Widely used in plastics, abrasives, chemicals,
pharmaceuticals, building materials, food, carbon, fertilizer, refractory
materials, light industry, mining, coal, metallurgical and other industries.
Stone production line is generally used conveyor belt as conveying equipment,
which has the advantage of big transmission capacity, long transmission
distance, smooth transportation, no relative motion between material and
conveyor, low noise, simple structure, easy maintenance, energy consumption,
parts standardization, etc., in the quarry, It is widely used in stones factory
and other places.
We must first sharpen his tools, before we want to do work well, such as the
selection of the crushing machine in stone crushing line( Stone crushing plant price ),
Choose energy-efficient, high durability of crushing equipment, it is not only
save the cost for Quarry Company, but also reduce the environmental pollution,
raise the earnings, realize the double win of economic and social benefits.
I graduated in Year 2009, and have changed many jobs. This year, I become one
cleark of Henan Hongxing Mining Machinery Co. Ltd. which is the professional
manufacturer of complete sets of mining machinery: ball mill, jaw crusher, impact crusher, rod
mill, energy-saving cone ball mill, sand maker, ore beneficiation equipment, Raymond mill and various mining
machines. In Hongxing, I meet a kind girl - Little Summer, who is my best
collegue and friend here. She came here 2 days earlier than me, and she is
younger than me, but we have many similarities.
Recent years, Hongxing develops very greatly, and also the business is larger
and larger. With the China crusher markets increasing, our jaw crushers, impact crusher, cone crusher and other types of
stone crushing equipment. With the raising business, the bosses announce better
treatment together with more serious rules. This is reality; this is life. For
bright future, work on with my Summer! As to He, I will put him into my
heart.
Discussions about the discrepancies between Sand production line and Sand making line
Recently, sand and gravel industry has become a hot topic on the market,
which make Sand and gravel production line has become the object of discussion.
According to source, sand and gravel lines has many types, its easy to mix them
up, making wrong judgments. In response to this situation, here we make a
discussion on this situation to talk about the difference of sand making plant
(impact crusher, VSI sand maker) and
sand production line equipment.
Sand production line consist of feeder, jaw crusher, fine jaw crusher,
'stone to stone' shaft impact crusher, vibrating screen, sand washing machines, belt conveyors,
centralized electronic control and other equipment, to meet customer demand, can
be matched cone crusher, dust
removal equipment. Then The stone
production line consist of jaw crusher (rough broken), impact crusher (fine
broken), shaft impact crusher, vibrating feeder, vibrating
screen, sand washing machine, belt conveyor and other equipment.
Sand production line can be used to crush hard limestone, granite, basalt,
river pebbles, pebbles, slag and other materials, artificial sand and aggregate
operations for water and electricity, construction, building materials,
highways, urban construction and other industry applications. The equipments
used in stone production line (sand and gravel production line) are to produce
sand and stone used in construction.
Sand production line material (limestone, granite, basalt, gneiss, river
pebbles, pebbles, etc.) complete the primary crushing through the feeder in to
jaw crusher, then the final stone complete the second crushing through the
transportation of belt conveyor in to fine jaw crusher, After secondary
crushing, stone transported by conveyor belt into the 'stone to stone' impact
crusher broken again, the broken stone material Transported by belt conveyor to
vibrating screen, then stone was screening into different sizes, a part of stone
which is meet the Customers size requirements transported to Product stockpile
by conveyor belt, then the Substandard stones was get back to shaft impact
crusher (impact crusher for
sale) to be crushing again, form a closed loop.
Stone jaw crushers for concrete crushing plant come out from Star
With the approaching of information technology era, China mining machinery
industry shows great changes not only in industry structure, but also industry
culture. Jaw crusher is the
main machine in mining industry for stone crushing. Stone jaw crusher can be used in
road construction, metallurgy, chemicals, kaolin, concrete and so on. Take the
concrete crushing plant as example. Generally there are concrete crushing stage,
concrete grinding process, and concrete products screening process in the whole
concrete crushing plant. About the concrete crushing equipment, jaw crusher
works as typical primary crusher.
From the primary crushing to the secondary crushing, concrete is crushed into
smaller pieces eventually. Also, there are vibrating screening equipment
which can separate different sizes products. For detail introduction, you can
come to our website to learn all our products: jaw crusher, impact crusher, cone crusher, hammer crusher, cement production line.
Apart from concrete crushing, jaw crusher is widely applied to crush high
hardness ,mid hardness and soft rocks and ores such as slag, construction
materials, marble ,etc, whose pressure resistance strength is under 200Mpa.
As we know, jaw crusher is widely used in mining and construction. Actually
the stone crusher is
also widely applied in metallurgical industry, road and railway building,
smelting, hydraulic and chemical industries, etc.
Raymond mill is
mainly applied to the powder processing of mineral products in industries of
metallurgy, construction, chemistry, and mining etc. Raymond mill can produce
powder from more than 280 kinds of non-flammable and non-explosive mineral
materials with Mohs hardness below 7 and humidity below 6%, such as barite,
limestone, quartz, calcite, granite, porcelain clay, basalt, gypsum etc. The
final size is between 613micron and 440 micron(0.613mm—0.044mm).
How to repair and maintain Raymond mill well and exactly?
1). During the application of our raymond mill, some personnel shall be
arranged to take responsibility of management from beginning to end. The
operators must be qualified with the required technical knowledge of opreating
grinding mills. Before the installation of this grinding mill, the persons
related to the operation should receive technical training and fully understand
the operating principle, performance and regulations of the raymond mill.
2). In order to guarantee the raymond mill in a normal working state, a
Safety Operation System for the Maintenance of the equipment must be
established. Only in this way can the raymond mill be guaranteed to have a
long-term and safe operation. Meanwhile, it is necessary to have the required
repairing tools, lubricant and grease, spare parts and accessories during the
operation.
3). After some period of running, the raymond mill should receive an
examination and repairing. The components vulnerable to worn out, such as
grinding roller, grinding ring, relieving tool etc. should be repaired or
replaced. Before and after the operation, a careful examination should be
carried out for the connecting screws, bolts and nuts on the grinding rollers so
as to find whether they are loose or sufficiently lubricated.
4). When their application time surpassing about 500 hours, all the rolling
bearings in the roller sleeves of raymond mill must be cleaned, and the damaged
parts should be replaced. The oiling tool can be either a manual oiling pump or
grease gun.
The effect on economy brought by information technology
As we know, we have entered into the information technology era not only for
information industry, construction industry and also mechanical industry.
Accompanied with the benefits of information technology, there is the economic
impact. jaw crusher,
sand maker
The economic impact of information technology has been a subject of a great
deal of debate. For business economists, it is useful to identify how
information technology (IT) is likely to impact the economy, because IT (defined
as computer and communications technology and its applications) is likely to
have a substantial impact on the economy's growth during the coming decades. The
reason for this is the use of IT by nearly all industries in the economy's base,
so that IT becomes a universal input to nearly all other outputs. If IT costs
decline, they can create substantial economic gains for many of the industries
that use IT, because money spent on IT can be invested in other inputs and
improvements in production or services. Furthermore, because business relies
upon IT to do a wide range of tasks and to create competitive advantage, by
facilitating these tasks for end users, important gains are achieved that are
difficult to measure in a classic input-output framework. In addition, IT, seen
in a larger context, should have even wider impacts on the economy, because new
channels of communications, such as the Internet, cellular television, and
broadband applications, will provide business with new channels to reach
customers and suppliers. flotation
machine, impact crusher
Knowledge 1, 2 , 3 on mining crushers and crushing
As one of the most important operations in aggregate process, crushing is a
process of suiting customerÂ’s requirements by breaking and shaping mine rock or
other stones to reduce their size for further processing. Generally, there are
more or less three phases: primary crushing, secondary crushing and tertiary
crushing. The primary crusher(usually jaw crusher, sometimes impact crusher, it depends on your
material type, size, hardness, etc.) reduces materials from under 1.5m to under
0.3m; For further size reducement, secoondary crushing can help you reach below
40 or 50mm, and in this step, cone
crusher is usually employed in consideration of product size and shape. When
it comes to tertiary crushing, material size is generally reduced to below
20mm.
As to the crushing methods, there are two most common types: compression
crushers and impact crushers. Compression crushers adopt the theory of squeezing
or pressing between rigid surfaces, such as jaw crusher, cone crusher,
dual-roller crusher, etc., while impact crushers employ impact, such as impact
crusher, vertical shaft impact crusher, super-fineness energy-saving crusher,
etc. This type of crusher usually has metal bars, to be specific, blow bar or
hammers, beaters, impellors, and they are attached to fixed rotors on a rotating
shaft surrounded by crushing chamber with metal impact plates or bars.
One new type of Cement mill produced by Hongxing - Raymond cement mill
With a small raymond cement
mill floor area and good entirety, raymond cement mill can operate
independently and automatically from piece crushing to raymond cement mill
product packaging.Powder ground by High Efficiency raymond cement mill can be
screened at a rate of above 99%, raymond cement mill other grinders are unable
to achieve. raymond cement mill Electromagnetic-vibrating feeder is
easily regulated, small in volume and light in weight. raymond cement mill saves
oil and electricity, and enjoys convenient maintenance. The raymond cement mill
adoption of it shall ensure the uniformity of feeding.raymond cement mill
Electricity is central controlled without manual operation in host machine
room.raymond cement mill Host machine driving unit adopts closed reduction
box,raymond cement mill achieves stable raymond cement mill transmission and
reliable rotation without leakage of oil.raymond cement mill Shovel tool rest
for host machine keeps in touch with raymond cement mill materiel while
rotating. raymond cement mill is composed of two parts, of raymond cement mill
bracket may be changed after abrasion through dismounting bolts connected.
Attention! High-quality counterfeit bills look so real
The serial numbers on this bunch of new high-quality bogus RMB 100 banknotes
are LN37638309, LN37638313 and LN37638302. Police seized 30,000 yuan worth of
high-quality counterfeit 100 yuan notes in Guigang city, Guangxi Zhuang
autonomous region, South China. It's difficult to tell these fake notes from
real ones as they carry water marks, metal wires and a number of other
anti-counterfeit features. [Xinhua]
According to CCI, in 2011 contton imports may go up
BEIJING - Prompted by booming domestic consumption, China may import more
cotton from the United States this year, said Karin Malmstrom, China director of
Cotton Council International (CCI), the export promotion unit of the US National
Cotton Council.
'According to one of our surveys, we are seeing a growing middle-class in
China that is willing to pay more for cotton,' Malmstrom said during a
promotional campaign on Tuesday.
'We are very optimistic about China's retail market,' she added.
As the world's largest buyer of cotton and soybeans, China has replaced
Canada as the largest export market for US agricultural products, according to a
report released by the US Department of Agriculture (USDA) earlier this
month.
China bought 996,100 bales of cotton from the US two weeks ago, the largest
weekly purchase in eight years, according to data from the USDA.
During the first nine months of the year, global cotton imports to China
declined to 1.9 million tons, a fall of 9.7 percent year-on-year, according to
data from China's General Administration of Customs. About half of those imports
came from the US, according to Malmstrom.
'With the recent large purchase, the import market share for US cotton is
expected to further expand,' she said.
In reality, things may not be so straightforward. China's cotton imports
depend largely on the health of its textile industry. More than 40 percent of
China's cotton imports are re-exported as textile products every year, according
to industry analysts.
And as the developed economies struggle with debt crises and high rates of
unemployment, 'Chinese textile companies are not very optimistic about the
export market', said Gao Fang, executive vice-president of the China Cotton
Association (CCA).
'In addition, China had a bumper cotton harvest this year, so it remains
uncertain whether imports from the US will increase,' Gao added.
Ma Wenfeng, a senior analyst at Beijing Orient Agribusiness Consultant Ltd,
said the volume of cotton imports this year is likely to remain unchanged from
last year.
'The price of cotton in the global market will remain stable for the time
being, thanks to the worldwide harvest,' he said.
China's cotton harvest this year is expected to jump by 9.3 percent from last
year to 7.28 million tons, according to a CCA forecast in October.
In October, China imported 252,000 tons of cotton, practically unchanged from
September, according to a statement on the CCA website.
The elevator for mining industry - bucket elevator, how to maintain and overhaul
To ensure bucket elevatorbe sustained, operation, we must do preventive
maintenance and overhaul plan of equipment well, and discover in time and
eliminate hidden dangers of accidents. Preventive maintenance plan is prevention
system of inspection, maintenance and repair for the lifting equipment
characteristics, including the cycle, content, quality standards for all kinds
of the maintenance etc. The hoist operators not only do the routine maintenance
and maintenance of equipment well, but also should participate in planned
maintenance and repair work of mine hoist.
First, routine maintenance of hoist equipment:
The daily maintenance of equipment, it is to show for the equipment in a
planned way of lubrication, daily inspection and clean job. Timely inspection
and planned repair work, it is a very effective method to reduce mechanical
parts wear, to prolong service life of hoist, And it will lay the good
foundation to improve the machine maintenance and greatly reduce the maintenance
frequency.
Second, regular inspection of hoist equipment:
The inspection of hoist is divided into daily inspection, weekly inspection
and monthly inspection. We should make the maintenance of the specific content
according to the performance, structure characteristics, working conditions and
maintenance experience of machine. The results and repair content should be
written in maintenance record book and the maintenance chief signs it.
1) when a chain and guide plates happen to collide, timely adjust guide plate
position.
2) when it has material between guide plates and chain, need to enlarge
inputs angle of the base
3) bearing fault, not the flexible and normal operation ,need to change
bearing in time .
4) material piece, or other foreign material with death card in the crust
base, need to stop and clear in time
5) the tooth shape of the sprocket (transmission, driven sprocket) is not
straight, to adjust sprocket teeth shape or replace the sprocket timely.
6) transmission chain produce idling, we need to adjust the chain length.
7) cabinet installation is wrong, we need to adjust the vertical degree of
the cabinet.
Grasping the competitive core, developing enterprise culture whole-heartedly
Joint-stock enterprise only stand on the situation with the height of the
profound changes, strategic perspective, a world view of Joint-stock enterprise
culture construction deep understanding, firmly grasp the significance of the
Joint-stock enterprise the direction of advanced culture, to the fierce market
competition continuously enhance its market competition ability.
China's accession to the WTO, in the face of economic globalization,
information network, world multi-polarization and domestic competition
internationalization, the international competition of domestic zed complicated
and diversified situation, with the socialist market economy, the development of
enterprise culture in the position and role of state-owned enterprises is
becoming more and more prominent, also deeply rooted in state-owned enterprise
vitality, creativity and cohesion of. Cultural competition has become the
state-owned enterprise development and expansion of the core
competitiveness.
Enterprise culture unified core values,enterprise culture open the door of
innovation,enterprise culture to forge the spirit of enterprise.
Therefore, an enterprise in order to obtain better development in the fierce
competition for survival, we must focus on corporate culture. The corporate
culture instilled in every employee, and become the dominant consciousness of
their words and deeds, so that employees abide by integrity, keep their
promises, extension, therefore no fraud, and enhance responsible for the
consequences of their behavior in the sense of responsibility, sense of morality
in order to maintain corporate reputation maintaining brand image, bring huge
economic benefits for the enterprise, and become a powerful survival,
development momentum.
One of the excellent Mother for fine coal - Hongxing coal mill
Coal mill profession - Henan Hongxing Mining Machinery enjoys the high
reputation coal mill manufacturer and devote to the coal grinding machine's
research and the production, to fully understand and meet user demand for coal
mill, is your best choice! In addition to coal mills, we can also provide many
other machines for cement production
lines,like rotary
kilns,pre-crushing equipment,and cooling machines, and more.
Coal mill is an efficient tool for grinding coals into fine powder in coal
mining industry. According to its fineness and working principles, we divide
coal mill into coarse power coal mill and fine coal mill. Coarse powder mill is
a kind of new high-tech milling machine to meet the requirements of coarse
powder processing customers. It is the ideal equipment to replace Raymond mill, ball mill, and other
traditional mill which only process fine coal powder materials.
Our vertical coal mill is compact design, simple structure, easy
maintenance,grinds any type of coal and high crushing ratio, adaptable to
specific process requirements ,high drying ability, reliable operation,long
service life of grinding parts,reliable performance, low operation cost ,easy
maintenance,stable quality, convenient maintenance,low invest, high
return.
The main body of ceramic production equipment includes raw materials storage
warhouse,dust chamber,fan,the main kiln,coal injection system,the control
cabinet,etc.The lower part of the raw materials warehouse feeders arch kiln
speed and the amount of coal are variable speed to adjust the process parameters
to ensure product quality under the premise of maximum yield.
Auxiliary equipment for production of ceramic:crushing machine,screen
machine,belt
conveyor,feeder,elevator,etc.
Production of fly ash and clay ceramic auxiliary equipment: wheel grinding
machine, dual-axis mixer, pellet mill, screening machines, belt feeding
machine.
The usage of ceramic
Ceramic has excellent properties, such as low density, high cylinder
pressure, high porosity, softening coefficient, good frost resistance,
alkali-aggregate reaction, etc. are excellent. It can be widely used in building
materials, gardening, food and beverage, fire-resistant insulation materials,
chemical, oil and other departments, applications more widely, is continuing to
expand.
The beginning of invention and production in the ceramic,which is mainly used
for building materials,due to the continuous development of technology and
people to a deeper understanding of ceramic properties,the application of
ceramic materials has already exceeded the scope of tradition ,expanding its
application of new areas.Now the application of ceramic in the building
materials, has dropped from 100% to 80% in other applications, accounted for
20%. With the continuous development of new uses for ceramic, the proportion in
other areas it will gradually increase.
Top trend: Information technology applys to manufacturing industry
Manufacturing information on the mechanical role in promoting industrial
development largely reflected in the four levels. First, products, information
technology, and through the integration of advanced manufacturing technology,
the traditional mechanical products into information, computer, laser and other
high-tech, making mechanical and electrical integration products, integrated
products of modern technology, enabling product enhancements , raise the level
of intelligence to meet the information age requirements of mechanical products;
Second, the design, manufacturing process automation and intelligence, greatly
shorten the design cycle, improve the success rate of design, design costs,
faster market response, the manufacturing process automation, intelligent and
improve product quality and consistency, labor strength reduction; Third, at the
enterprise level, the company's various information integration, the formation
of the sharing of resources, improve enterprise management level, efficiency,
economic efficiency, thereby enhancing the market competitiveness of
enterprises; Fourth, enterprises realize the interconnection of information, so
that shared resources of different enterprises, dramatically changing the
machinery of industrial organization, development, production and business
model, reduce duplication and waste of resources to adapt to economic
globalization and the Internet of the requirements, and enhance the overall
competitiveness of the industry.
Information to the organizational structure of manufacturing enterprises may
be a straight line from the original functions of the system into a flat pyramid
organization of the network organization. Such as manufacturing, jaw crusher, ball mill energy has
entered the information mode of production, greatly improved its functionality
and usability, and mining machinery manufacturing industry to meet its
needs.Planned economic system, is a manufacturing company is only responsible
for the production of basic economic organization, but also a 'large', 'small'
mode of production, business and even assumed the social functions, R & D
capabilities weak, sales sectors of the weak, and relatively large processing
capacity, organizational structure, like olives, two small, the middle. In a
market economy, enterprises have become the main market, the need to strengthen
research and development and sales management, and the middle part of the
processing can take advantage of the processing capacity of the community,
organizational structure, such as dumbbells, two strong, the middle sperm.
Information to the organizational structure from the 'olive' to 'dumbbell'
change is possible.
Information technology also enables manufacturers to a fundamental change in
production mode. Lean and agile manufacturing, concurrent engineering, mass
customization, and so the endless mode of production, there were the result of
birth information. E-commerce, supply chain management, manufacturing and so the
network can not do without information technology, it is also the information
associated with the new production organization to continuously improve the
competitiveness of the manufacturing sector, rising to a new level, can continue
to meet the user's individual requirements.
Facing different environment, different technology developed for manufacturing
With scientific and technological development, especially in electronics,
information technology, rapid development, more and more high-tech applied to
the machinery manufacturing industry. Especially in recent years in China has
become our familiar word, but, in China almost become synonymous with poor
quality products, which can be seen that our product quality to be improved,
which depends largely on the our manufacturing process. Industrial countries
over a wide range of high-precision machining, precision machining,
micro-machining, micro-mechanical and micro / nano technology, laser processing
technology, electromagnetic processing technology, super-plastic composite
processing technology and processing technology and other new processing
methods.
High dependence on foreign technology , resulting in the development of
China's machinery manufacturing industry, controlled by others. China's
dependence on foreign technology up to 50%, while the United States, Japan is
about 5%, the ratio in developed countries are generally below 30%. And
self-sufficiency rate of China's key technologies, representing about 40% of
investment in fixed assets investment in equipment, there are more than 60% rely
on imports to meet, the key high-tech equipment is basically dependent on
imports. Especially since the reform and opening up, more and more foreign
companies to invest in China, China has introduced a number of foreign advanced
equipment but did not grasp the core technology. The industry believes that
China's machinery industry, there is a huge technological 'black hole', the most
prominent manifestations of the high dependence on foreign technology.
China's mining machinery manufacturing industry for many years, and now use
their own design 'heart' a little, and it makes a lot of mining machinery
industry whom trouble. But now there are several mining machinery manufacturing
enterprises started to pay attention to design their own main brand products. It
is noteworthy that many key areas, especially outside the field of defense
technology dependent, would pose a serious challenge to national security. As a
national high-tech Industrial Development Zone window, there is 57% of
technology from abroad. The industry generally believes that technology is state
of black hole formation and the degree of emphasis put into closely related.
Countries in the past two decades ignored the development of machinery industry,
policy, and funding has gone wrong. The most typical example is the state-owned
enterprises. State-owned enterprises on the creative talents of the property is
basically no incentive to implement, and property rights stimulate innovation
and R & D system is an important guarantee for the product. R & D
technologies and products, or taken away without compensation by the state,
either free copy by other companies. Take the example of China's mining
machinery manufacturing industry.
Eying on mining machinery, striving for further improvements
Gravel equipment mainly refers to the jaw crusher machine,
stone-breaking counter-type machine, cone crusher stone machine, impact crusher, sand making machine, vibrating screen, feeder and
stone milling machines and other equipment. In the widely used high-speed
railway construction. Recently, the 'twelveth-five' after the railway
construction investment will directly boost mining machinery market in China
more than 10% growth in demand for any business is concerned, the data shown by
the size of the market is not overlooked. Face of China's high-speed railway
construction peak of the arrival of the market demand is particularly strong.
However, due to high-speed railway construction, aggregate and concrete sand and
gravel aggregate demand is relatively high, and to meet the needs of the
industry with the production capacity of large companies at least a decade or
more.
Currently, almost all of the engineering, mining machinery companies are
responsible for railway construction, especially in high-speed rail construction
has been greatly concerned about. Some companies want to be able to use existing
products, the construction of the railway east onto a new stage; Some companies
will look into the new product development. Crusher machine equipment, for
example, such products are subject to railways, highways, bridges, affecting one
of the most significant products. In particular, railway construction, the use
of piles in the air, railway and industrial products, requires a lot of
aggregate and concrete aggregate.
Henan Hongxing Machinery Co., Ltd. on the production of a number of mining
gravel equipment PE jaw crusher, Impact crusher machine, stone-breaking
counter-type machine, cone crusher stone machine, impact crusher machine (a new
type sand making machine), and feeder, vibrating screen, sand washing machines
and other equipment installed in the various provinces units wide highways and
high-speed railway construction, is an essential national infrastructure
equipment. For basalt broken, broken by the cone over the broken stone machine
stone, stone-breaking machine after Impact (new sand making) Whole, the content
can be reduced to stone-elongated 3-5%, compared with the crusher than can
greatly improve the production capacity. Provinces and cities nationwide
high-speed railway construction in accordance with the process, we are well
prepared to service the country, with the key provinces and cities nationwide to
maintain close cooperation between engineering units, the user-site to provide
full technical and service support. Long cycle of large-scale construction
projects, sent to track visits, comprehensive customer service site. Improve
service coverage area.
The supporting role for a new era of mining machinery
Mechanical Engineering, the general trend of scientific development will be
digital, intelligent, precision, miniaturization, and ecological life. Mining
Machinery (Crusher) as a branch of mechanical engineering disciplines, but also
follow this general trend. Meanwhile, the mining industry, combined with the
characteristics of its development trend is digital, intelligent, ecological and
amenity-oriented. Mining Machinery (Crusher) into the manufacturing sector
should continue to excellence in all fields of human achievement, a major demand
for national economic construction, scientific concept of development, achieve
sustainable development.
China's 'Eleventh Five-Year Plan' stated, to build a resource-saving and
environment-friendly society, focusing on the development cycle of the economy,
saving and try adhere to the development, conservation priority, according to
reduction, reuse and recycle principle, resource extraction, produce
consumption, waste generation, consumption and other sectors, and gradually
build the whole cycle of use of system resources in the community; to save
energy, save water, saving land, saving materials and strengthening
comprehensive utilization of resources to strengthen the promotion of
conservation policies. Machinery manufacturing industry from the simple pursuit
of scale and efficiency of the model to build the economic direction of the 4R's
reincarnation.
Natural environment for the harmonious development requires mining machinery
(crushers) 'eco', with a variety of senior technology to improve manufacturing
model, manufacturing resources, manufacturing, process manufacturing
organizations continually different and the product throughout the life cycle
does not cause environmental pollution or environmental pollution minimization,
resource utilization, the highest, lowest energy consumption, the ultimate
enterprise coordination of economic and social benefits. Efficient, zero
emission fuel cell Mining Machinery (Crusher) has a good vision of development.
Mining Machinery (Crusher) in computer technology, network technology,
multi-disciplinary integrated support for economic development, driven by demand
in the market, the natural world in harmony with human development, mining
machinery (Crusher) has toward the digital, intelligent, ecological and
amenity-oriented direction.
The Killer of Coal Gangue pollution - Hongxing Coal Gangue crushers
Along with the national environmental protection law enforcement increasing,
people rise requirement of the environment quality. The issue of solving the
environment pollution caused by Coal Gangue is becoming more and more serious.
Gangue power is to make full use of the efficient heat ingredient of Gangue,
turning waste to wealth. It's the efficient way to slove the problem. Good-
perform coal gangue crusher is with low fineness output, low noise, energy
saving, convenient to use, etc. It well effects hard, dry and wet material. It
does not plug, moisture percentage available, output fineness 90%.
1) Up-down two shale crushing with two sets of rotor motif to each other.
After up side rotor hammer crushing, the material is immediately crushed again
by rapid rotating hammer of down side rotor. Material inside mutually reverse
collide and crush rapidly, to achieve the best purpose of crushing.
2) Unique two-way adjustment gap technology, the gap between hammer and plate
becomes biger after wearing, and the particle size coarsens. This can be solved
by adjusting hammer from center to the outside, to reduce the gap. Or by pushing
plate to adjust the gap, control output size by yourself.
3) Smooth operation and enough inert ance, two sets of rotor shaft end are
equipped with the flywheel, the flywheel can adjust speed fluctuation of
periodic operation. Smooth running, increases the rotation inertia, overcome
resistance. It van save electricity above 20%.
4) It is designed without screen in the grate bottom. It almost has no
requirement on moisture. So it neither plug screen, nor charge small size and
crush again and again. It is with high efficient powder outputting and no hammer
wearing.
5) Centralized lubricating system, non-stop note oi. Reform yellow nozzle and
traditional way of filling lube oil cup. It is with one step, configuration to
oil pump on the distribution, filling from different way. It is so convenient
and easy to operate that it can fill lube all bearing and synchronous at the
same time working.
