Recently, people is paying more attention to personal health. In the life, good personal habit can keep you healthy and strong. Here is a question: How often should you change your knickers? Often, occasionally or seldom or never?

My mother once commented to me, “You are either very clean, or very dirty!” As she found our house was always strewn with washing – either dirty; hoping to be ironed; or waiting to be put away! It is probably a bit of both given three children, and one with a liking for mud. But it got me thinking – have our standards changed? Is it no longer acceptable to wear the same T-shirt for a week? A friend recalls, as a child, knickers were only changed every other day! Yet now I know of people who wash their shower towels everyday; and others who can’t bear any dirty laundry around and will use the washing machine three times a day, every day.

So given that the average modern washing machine, according to sust-it’s database of electrical appliances, costs, around 22p per cycle and uses around 55 litres of water, washing too often will certainly be bad for the environment and our pockets. And that would be if everyone had a washing machine less than 10 years old, which they don’t. Plenty of people still have machines that have been going for years, oblivious to the amount of energy they are consuming. So multiplied over the country that adds up to a lot of carbon being emitted not to mention the costs.

So how clean should we be? How often should we change our sheets/towels? I had a very odd discussion once with a distinguished university professor about how he and his wife turned over their bed sheets after two weeks to get more use! Well we all know how wonderful it is to get into a bed with fresh sheets – but how often is it necessary to wash them. There are obviously people with allergies who need to wash their bedding very regularly – but what is normal? And has this changed over the years.

What happened in the past with Monday wash days, and no tumble dryers? The size of washing machine drums has grown too, it’s now possible to fit 9kg in some machines. If you have a family and enough clothes to wash in bulk, these machines can work out more economical, but not if they are used to wash just 3.5Kg of washing and are used the same amount of times. I know I usually have too much for my 5kg machine and a bigger drum would cut down on the number of washes. But before we all rush out to stick solar panels on roofs, we should think about how we can do less washing. Although I would always have to have clean knickers – who knows when you might get run over!!

Attention: Every day is a new and wonderful day to develop a good living habit to keep your healthy.

07-03-2012 om 06:27 geschreven door annazhao356  

When you have to use your car, we can help you make sure it's as efficiently as possible, with tips on choosing a car - plus the latest information about electric cars - fuel-efficient driving, cleaner fuels, and tips for making your journeys shorter or avoiding them altogether. Plus information about walking, cycling and using public transport, and what to do about flying.

How you use your car changes how it affects the environment, and simple changes may not only reduce carbon emissions and benefit the environment, but also save you money.

These are all simple common sense. Once they become automatic habits, they’ll save you money and stress.

1)Keep your car in good condition. Tuning, tyre pressure, and regular servicing all make it more efficient. Keep an eye on fuel consumption – if it goes up suddenly, you know something’s wrong.

2)Roof racks increase drag. The reason modern cars all have the same overall smooth, bulbous look is that they’re all designed to be aerodynamic, slipping through the air with minimum friction and maximum efficiency. Roof racks have exactly the opposite effect – so don’t keep them on the car unless you’re likely to use them, especially for long, high-speed journeys.

3)Extra weight increases fuel use. Despite the hype, cars aren’t actually magic! If you ask them to do more work, they’ll need more fuel. Do you really need everything that’s lurking in the boot?

4)Air conditioning also increases fuel consumption, so only use it when you need it.

5)Onboard electrical devices increase fuel consumption as well – the engine has to work harder if it’s to produce more electricity.

6)Drive smoothly. Excessive braking and accelerating takes more energy, wears out your car faster, makes your passengers feel ill – and doesn’t say much for your driving skills, either!

6)Don’t keep your engine running while stationary – if it’s safe to do so, switch it off.

8)Drive more slowly. Higher speeds significantly increase fuel consumption.

9)Higher gears are more efficient, so move up through the gears as soon as you can.

10)Combine journeys – do several chores at once, or give someone a lift. Think of the car as a bit of a luxury, so that you’ll take maximum advantage of each trip.

07-03-2012 om 06:27 geschreven door annazhao356  

China does a lot of manufacturing for foreign companies, including U.S. companies. The raw materials are shipped to China, where factory workers build the final products and ship them back to the U.S. In this way, a lot of China's exports are really for American companies for American consumers. China primarily exports electrical and other types of machinery, especially computers and data processing equipment, as well as optical and medical equipment. It also exports apparel, fabric and textiles. It imports raw commodities from Latin America and Africa, such as oil and other fuels, metal ores, plastics and organic chemicals.

China's economy produced $10.9 trillion in 2010, (based on purchasing power parity), making it the third largest in the world's (after the U.S. and the European Union). It's been growing more than 10% per year for the last 30 years. China exports $1.58 trillion of its production, making it the world's second largest exporter after the EU. China ships 18% of its exports to the U.S., which created a $272 billion trade deficit in 2011. While China needs the U.S., it's increasing its trade with Hong Kong (13.8%) and Japan (7.6%). It's encouraging trade with African nations, investing in their infrastructure in return for oil. Finally, China is increasing trade agreements with other Southeast Asian nations, and with many Latin American countries.

As of November 2011, China owned $1.132 trillion in U.S. Treasury bills, bonds and notes. This is 23.8% of the total $4.8 trillion of debt held by the public. China has cut back a bit, from its peak holdings of $1.173 trillion held in July 2011.

Nevertheless, China is the largest foreign holder of Treasuries. China does this to support the value of the dollar. China pegs its currency (the yuan) lower than the U.S. dollar to keep its export prices competitive.(Source: U.S. Treasury, Major Foreign Holders)

China's role as America's largest banker gives it leverage. For example, China threatens to sell part of its holdings whenever the U.S. pressures it to raise the yuan's value. China counters by saying it did raise the yuan's value by 20% between 2005-2010. However, this year China manufacturing industry also has good trend. Taking mining machinery industry as an example, with the development of building construction, railway construction and water conservancy construction, the sales amounts of dryer machine, ore beneficiation and stone crushing plant are getting higher and higher.

07-03-2012 om 06:27 geschreven door annazhao356  

Already known in the butterfly valve technology, sealing in the form of its multi-sealed structure, the sealing material is rubber, PTFE and so on. As the structural features of the restrictions is not suitable for high temperature, high pressure and corrosion resistance, abrasion resistance and other industries. Present a more advanced triple eccentric butterfly valve is metal seal butterfly valve, valve body and seat components for the piece, the valve seat sealing surface layer welding temperature, corrosion resistant alloy material. Stacked multi-layer soft ring fixed in the valve plate, this butterfly valve compared with the conventional high temperature, easy operation, open and close without friction, closed with the transmission of torque to compensate for increased seal and improve the a valve sealing performance and durability advantages.

However, this butterfly is still in the course of the following problems:

First, as hard and soft layers stacked ring fixed in the valve plate when the valve plate to its normally open state media to form a positive sealing surface erosion, dissection of the soft metal tape by erosion, the direct impact on the sealing performance. Second, by the structural constraints of the structure do not meet the following diameter DN200 valve, because the overall structure of the valve plate thick, large flow resistance.

Stainless steel butterfly structure can be divided according to the bias plate, vertical plate, inclined plate, and leveraged. By seals can be divided into relatively closed and seal type two kinds. Soft sealing type commonly used rubber ring seal, seal type commonly used metal ring seal.

Currently, Stainless steel butterfly as a piping system used to achieve off and flow control components, has been in the petroleum, chemical industry, metallurgy, water, electricity and many other fields has been very widely used. Affected by steel price, global mining machinery market goes ups and downs, especially for jaw crusher market, impact crushers and stone crushing plant. If the requirement to use flow control valve as the main choice is the right size and type of valve. Butterfly structure principle is particularly suitable for production of large diameter valves. Butterfly not only in oil, gas, chemical, general industrial water treatment is widely used, but also used in thermal power plant cooling water system.

07-03-2012 om 06:27 geschreven door annazhao356  

Pump is to transport the liquid pressurized liquid or mechanical. It will be the prime mover or other external energy to mechanical energy transmitted to the liquid, the liquid energy increases. auto water pump is mainly used to transport liquids such as water, oil, acid liquid, emulsion, suspension emulsion and liquid metals, but also transport liquid, gas mixtures and liquids containing suspended solids.

Widely used in automobile engine centrifugal pumps. The basic structure consists of the pump housing, the connection plate or pulley, water pump shaft and bearings or bearings, water pump impeller and seal devices constitute parts.

A wide range of pumps, according to the principle can be divided into:

A). power pump, also known as a pump or vane impeller pumps, relying on rotation of the impeller on the liquid dynamic effect, the energy transfer to the continuous liquid, the liquid kinetic energy (mainly) and the pressure can increase, followed by pressing the Room will be converted to pressure energy kinetic energy, can be divided into centrifugal pump, axial flow pump, part of the vortex flow pumps and water pumps.

B). positive displacement pumps, relying on an inclusive volume of the liquid sealing space periodic changes in the energy periodically passed to the liquid, the liquid pressure increases to force the liquid discharge, according to the movement of work component form can be divided into reciprocating pump and rotary pumps.

C). other types of pumps to other forms of energy transfer.

Rely on high-speed jet as the jet pump will be required to transport the working fluid suction pump after the fluid mixture, the momentum exchange to transfer energy; water hammer pump the brake when using the water flow in the part of the energy transfer is to rise to a certain height; electromagnetic pump is to power of the liquid metal flow under the action of electromagnetic forces to achieve delivery.

In addition, the pump also can be transported nature of the liquid, driving method, structure, use other classification. Improvement of water for human life and production are very important. Water has been put on a variety of ancient instruments, such as Egypt's chain pump (17th century BC), China's Jie Gao (17th century BC), gin (11th century BC) and the waterwheel (1st century AD). There are more well-known third century BC, Archimedes invented the screw rod, a smooth continuous water raised to a few meters height, the principle is still used by auto water pump.

For water transport, there are unique tools for this work. So is mining machinery transport. In mining industry work, there are many equipments used such as Raymond mil, hydraulic cone crusher and belt conveyor manufactured by we Henan Hongxing Mining Machienry Co., Ltd..

07-03-2012 om 06:26 geschreven door annazhao356  

August 30, 2011, Chinese Mechanical Engineering Society held at the Diaoyutai State Guesthouse in Beijing, 'China Mechanical Engineering Technology Roadmap' premiere. Ministry of Industry and Information Technology committee member, attended the ceremony, Zhu HongRen, chief engineer and made a speech.

In his speech, Zhu HongRen, described the equipment manufacturing industry in the national economy's status and role, a brief review of China's equipment manufacturing industry in recent years, the achievements that China's equipment manufacturing currently exist in the proportion of high-end equipment and brand awareness is not high , industry-level low; own capabilities and technical reserves; key components, the core components and systems are still controlled by others, industrial supporting capacity is weak; industry concentration is low, the lack of a strong internationally competitive large enterprises and other prominent problem.

Zhu HongRen, fully affirmed the development and implementation of 'China Mechanical Engineering Technology Roadmap' to revitalize the equipment manufacturing industry necessity and importance. 'China Mechanical Engineering Technology Roadmap' is a collection of many scholars and engineers of the wisdom of the scientific method analysis of the future economic and social development of the equipment, product demand, the bottleneck for the development of industrial technology and equipment through meticulous combing and in-depth study of the formation of . It is for 2030, how to achieve China's machinery manufacturing technology innovation, focusing on cross, supporting the development and lead the strategic roadmap for the future, to speed up transformation and upgrading of the equipment manufacturing industry put forward new ideas. Outlines the strategic positioning revitalize the equipment manufacturing industry, for government departments to do top-level design and technological innovation provides an important reference.

It's for the 2030 mechanical engineering technology development of green, smart and extraordinary, five major trends in integration and service creative and complex electromechanical systems, modeling, simulation, optimization techniques, parts precision forming technology, forming technology of large structural parts high-speed precision machining technology, micro-nano devices and systems, intelligent manufacturing equipment, intelligent integrated drive technology, digital technology, engineering, eight for the construction of power equipment manufacturing industry pointed out the direction. Once these technologies to achieve breakthrough for China's equipment manufacturing industry will bring a revolutionary leap. For example, China mining machinery industry has make further progress in recent years, such as Combination crusher, Flotation machine and Jaw crusher.

Zhu HongRen, and implementation of sound, 'China Mechanical Engineering Technology Roadmap', put forward three suggestions: First, technological advances and changes in social and economic environment in all areas of technology development on a regular basis to revise and supplement; Second, as soon as possible to develop a scientific , operable, 'China Mechanical Engineering Technology Roadmap,' the implementation details; third is to further expand the publicity so that the relevant government departments, equipment manufacturers and research institutions in-depth understanding to ensure the smooth implementation of the roadmap.

07-03-2012 om 06:26 geschreven door annazhao356  

For the first time in more than a year the global powers dealing with Iran’s disputed nuclear program said Tuesday that they would resume face-to-face negotiations.

'I have offered to resume talks with Iran on the nuclear issue,'said Catherine Ashton, the European Union’s foreign affairs chief, who represents the United States, Russia, China, France, Britain and Germany in dealings with Iran. 'We hope that Iran will now enter into a sustained process of constructive dialogue which will deliver real progress.'

The resumption of negotiations could relieve rising pressure from Israel to use military force against Iran. But the decision is not without risks. Direct talks could allow Iranian negotiators to exploit various nations’ differences. Failure could offer a rationale for military strikes.

The Israelis are increasingly skeptical that international pressure will lead Iran to abandon its uranium enrichment activities, which Israel and the West suspect are a cover for Iran to achieve the ability to make nuclear weapons. Iran has said the activities are purely peaceful.

At a news conference in Washington on Tuesday, Mr. Obama defended his record on Iran against Republican critics who have called him too lenient. On the contrary, Mr. Obama said, he had deeply isolated the Iranian authorities and had helped to press them to resume negotiations.

The resumed talks represent a significant step forward because all six parties agreed to participate. But that may have been the easy part. One senior French official said that a desire to avoid a military confrontation could lead some parties to take a softer stance on Iran, looking for any small concession that could be interpreted as success.

Time is of the essence for negotiators because many fear that any stalling by Iran will give the country more time to relocate enrichment centrifuges deep inside mountain bunkers that are difficult to bomb.

There was little optimism in the West that talks would lead to significant breakthroughs, much less to an end to Iran’s nuclear ambitions. Guido Westerwelle, Germany’s foreign minister, warned Iranian officials against using talks to stall.

Hanging over the resumption of talks is deep concern about a rerun of previous negotiations in Istanbul that broke off in January 2011 when the Iranians resisted discussing the nuclear issue. In France, Bernard Valero, the Foreign Ministry spokesman, warned against a repeat of 'the experience of the fruitless discussions in Istanbul' and underlined that Iran faced a 'united' front from global powers.

Such a failure could increase the risk of military action, said Trita Parsi, president of the National Iranian American Council, an advocacy group in Washington.

This news was carried from Nytimes by Henan Hongxing Machinery who is the professional manufacturer in China for jaw breaker, impact crusher, Raymond mill machine and the wohle set of mining machinery.

07-03-2012 om 06:26 geschreven door annazhao356  

Using the correct installation technology knowledge and tools, we can ensure that the bearing of screen machine is not damaged. However, not all the machines are equipped with advanced instruments. In this case, the operator or maintenance engineers must keep alert on the bearing fault signal, such as noise, temperature and vibration. Listening, touching and watching are the common and simple three methods. The equipment is a new kind of high efficiency screen equipment. It is manufactured with long material screen rifling, multiple layers and various specifications. It is featured with clear screening and high screening efficiency. It has been widely used for screening in the mining and sandstone industries. It can also be used for product grading in the industries of coal dressing, beneficiation, building materials, electric power, chemical engineering, etc. So we can provide the methods of listening as your reference. It is especially designed for screening stones and features reliable structure, strong vibration force, high screening efficiency, low vibrating noise, excellent durability, convenient maintenance, safe use, etc.

We can ensure the highest bearing life through the proper lubrication and protection plan, and bearing state detection. It is a very common method by using hearing to identify irregular operation, such as experienced operator can use an electronic stethoscope to look up abnormal noise of a part. If the equipment is in good operation condition, it will have a low voice; if it is sharp sound, so bearing usually is in an abnormal operation condition. Sharp creak may be caused due to the inappropriate lubrication. The dentin the bearing outer track can cause smooth clear voice.

If we install the bearing to make percussive wound, it will also produce noise, the noise will be different with the speed of bearing; if there are intermittent noise, it means that the rolling may be damaged; After the damaged surface is rolled, if there is pollutant in the bearing, it often causes hissing sound and the serious bearing will produce irregular and great noise.

Although we can check vibrating screen by hearing, bearing must be replaced immediately at that time. So, it is a better method to use electronic testing instrument, this can diagnose ahead of the workings of the bearing. Compared with the old method, it is a more accurate method to use advanced instruments. Hongxing is a professional vibrating screen manufacturer in China, which was established in 1986. We mainly supply stone crushing machine, sand makers, powder-grinding machine, energy-saving coal ball mill and ore dressing machines and we also can accept product line or turnkey project.

06-03-2012 om 02:24 geschreven door annazhao356  

Using the correct installation technology knowledge and tools, we can ensure that the bearing of screen machine is not damaged. However, not all the machines are equipped with advanced instruments. In this case, the operator or maintenance engineers must keep alert on the bearing fault signal, such as noise, temperature and vibration. Listening, touching and watching are the common and simple three methods. The equipment is a new kind of high efficiency screen equipment. It is manufactured with long material screen rifling, multiple layers and various specifications. It is featured with clear screening and high screening efficiency. It has been widely used for screening in the mining and sandstone industries. It can also be used for product grading in the industries of coal dressing, beneficiation, building materials, electric power, chemical engineering, etc. So we can provide the methods of listening as your reference. It is especially designed for screening stones and features reliable structure, strong vibration force, high screening efficiency, low vibrating noise, excellent durability, convenient maintenance, safe use, etc.

We can ensure the highest bearing life through the proper lubrication and protection plan, and bearing state detection. It is a very common method by using hearing to identify irregular operation, such as experienced operator can use an electronic stethoscope to look up abnormal noise of a part. If the equipment is in good operation condition, it will have a low voice; if it is sharp sound, so bearing usually is in an abnormal operation condition. Sharp creak may be caused due to the inappropriate lubrication. The dentin the bearing outer track can cause smooth clear voice.

If we install the bearing to make percussive wound, it will also produce noise, the noise will be different with the speed of bearing; if there are intermittent noise, it means that the rolling may be damaged; After the damaged surface is rolled, if there is pollutant in the bearing, it often causes hissing sound and the serious bearing will produce irregular and great noise.

Although we can check vibrating screen by hearing, bearing must be replaced immediately at that time. So, it is a better method to use electronic testing instrument, this can diagnose ahead of the workings of the bearing. Compared with the old method, it is a more accurate method to use advanced instruments. Hongxing is a professional vibrating screen manufacturer in China, which was established in 1986. We mainly supply stone crushing machine, sand makers, powder-grinding machine, energy-saving coal ball mill and ore dressing machines and we also can accept product line or turnkey project.

06-03-2012 om 02:24 geschreven door annazhao356  

Perception is often reality and once people get an idea in their head about someone or something, it can be difficult to get them to think differently. In my experience, your attitude in the workplace can sometimes define you more than the work you actually produce if your coworkers come to see you as someone who is reliable, competent, and intelligent and someone that they can rely on.

Your attitude in the workplace can be one of the most - if not the most - telling aspect of how others in the company look at you and feel about you as a coworker.

In the end of Dec., 2011, two customers from_middle East country came to visit us. In these two days, our customers gave our high praise to our working attitude. Think of someone you've worked with who perhaps didn't work as hard as you expected them to and then think about how you felt about every time you had to work with them.

They said, when they come to Hongxing, no matter it is Saturday or Sunday, no matter it is_middle night or early morning, friends from here still will come to pick up them in the airport, and meet them for business. It is not only business, it is a friendship, is an attitude for customers, for foreigners from other countries long distance. This attitude is good for the business, good for the friendship with the customers. When I come to China, I met too many salesmen from other companies, when I called them, they said it is off-work time, please come to our company tomorrow. They ignored my time is urgent, ignored we came to China from hundreds and even thousands of miles, they just said, it is six o’clock pm now, we are off work now. Thus salesmen are not for business, we will not choose them for our partners. Friends are very friendly and responsible to us, and their ore beneficiation products are so good, their factories are so amazing.

Having formerly worked for a company that regularly laid off staff, I can tell you that the people who were let go first were often those who were generally regarded as being staff who didn't display these positive traits and therefore weren't seen as being employees who needed to remain employed. In general, a good working attitude for business is very important; the customers will choose salesman or sales women who are responsible and conscientious to manufacture and promote their crushing and grinding machines like sand maker, sand wahser.

06-03-2012 om 02:24 geschreven door annazhao356  

Ore washing work is usually set in the front or back of the coarse crushing, depending on the size of raw ore, the moisture content and the structure of the ore washing equipment. Commonly used ore washing equipment is washing screen (diagrid sieve, screening machine and cylinder sieve), slotted ore washing machine and cylinder ore washing machine. After the ore is washed, some of the clean ores need to be crushed, and some can be regarded as qualified grain level. If the mud that washed out has a grade which is similar to tailings grade, the mud can be abandoned. If the grade is similar to raw ore grade, the mud needs to be select. For the different nature of the raw ore, the ore washing methods and fine mud treatment are different so that there are different process flows.

In actual operation, a charge of material such as rock containing gold ore is deposited into the box from conveyor 62 and a volume of water is injected from pipe 64. The eccentric drive is then operated to reciprocate the rod 60 which in turn causes the box to simultaneously roll and rock over the rollers. The relatively large size radius of the corners 24-30, in combination with the rolling and rocking action which is imparted to the box, causes the contained charge to be directed in a generally figure eight path 90. The schematic of FIG. 3 illustrates the movement of individual particles of the charge within the box along such a figure eight path. The resulting movement of the charge against and through the vibrating screen achieves a more complete and uniform circulation and mixing action so that the screening and washing is more complete and efficient as compared to similar types of ore washing machines.

When the mud (-3mm) content in raw ores is greater than 5-10% and the water content is greater than 5 ~ 8%, ores in fine grain level will bond into lump so that production conditions of ore crushing process will deteriorate, such as crushing cavity in crusher and sieve pore in sieving machine will be blocked, and when the condition is serious, the production can't be going on. At this time, ore washing facilities should be added in the ore crushing process. Adding ore washing machine, the machine operator can make full use of the equipment potential, make production regular, ameliorate labor strength, improve the recovery of useful metal and expand the use of resource.

Particles within the box such as rocks and ore are free to move in a complete circuit along the figure eight path so that the ore fines are readily screened downwardly while the larger sized rocks and stones are more completely washed as they gradually advance for discharge through chute 78. At the same time, the actuate corners preclude the packing of residue or sediments within the box corners. Moreover, the provision of setting the discharge spouts 66 and 68 at an upwardly inclined angle of 45° or less with respect to the side walls provides for a more efficient separation of ore fines, such as gold, platinum, silver, and titanium, from the box. Microscopic particles of the ore, such as gold, can be retrieved downstream of the discharge spouts.

For excellent bath for ores, we manufacture and supply wonderful sand washing machines and vibrating screens. We believe that you will get fine ores with our products.

06-03-2012 om 02:24 geschreven door annazhao356  

International Women's Day (8 March) is a global day celebrating the economic, political and social achievements of women past, present and future. In some places like China, Russia, Vietnam and Bulgaria, International Women's Day is a national holiday.

The annual international Women’s day arrived in time. In the morning of March 8th, colleagues of Hongxing administrative center went to various offices of the company headquarters and industrial park, to show company’s greetings for all female employees.

In modern society, with the unprecedented economic independence and the rise of education level, women are standing out with an equal, independent, and self-confident attitude in society. In the HXJQ team, there are certainly many female talents. Whether in the forefront, or in management center, they all have made an indelible contribution for the company's development.

Hongxing Machinery is a global supplier of sustainable technology, mining equipment like sand maker and Raymond mill and services for mining, construction, power generation, automation, recycling and the pulp and paper industries. We have about 28,500 employees in more than 50 countries. Our company uses its pioneering spirit to responsibly deliver energy to the world. This purpose transcends all of its operations. The company conducts its business to return maximum value to shareholders while utilizing a wealth of knowledge and resources from its employees and acting responsibly in all communities in which it operates.

Early before the month of Women’s day, the company has started to make plans for 'Care for women' activities. Apart from a rose, Hongxing has also sent a mocha card to each female staff. Seeing the gifts, many male colleagues said,” it’s such a good thing to be a woman. I also want be a woman next life!'

06-03-2012 om 02:24 geschreven door annazhao356  

As the important part of the production process of HPC220 hydraulic cone crusher made by Henan Hongxing Machinery Co. Ltd, quality supervision is also the significant content of quality management. At present, the quality supervisors of Hongxing has taken part in the whole monitor of producing HPC220 hydraulic cone crusher, containing machine processing, assembly, welding and other aspects.They can summarize and feedback the problems timely to ensure to meet the customers' demands faster and better.

When referring to the significance of the job, our quality supervisor---engineer has his own attitude: creating perfect quality is always our unremitting pursuit, and the arrangement of the quality supervisor is aimed at prompting the process. 'To tell the truth, the pressure is really great when you are in this position. Although I have engaged in related work for many years, the supervisor is required to control the whole process, and be good at discovering problems so as to summarize and improvement. So constant learning is a must.' Reportedly, in addition to the selection by the internal layers, the quality supervisor has got systematic training about law,producing procedure, and relative rules. What's more, our company specially appoints. In addition, our quality supervisors will summarize and analyse the problems found at the producing scene , and then carry out special training for the counterpart staff in related area. As for the achievements of the quality supervisor , our company will conduct regular assessment according to the production and the feedback of the customers.

During the interview, Engineer Zhang---the quality supervisor has shown us all the record of supervising producing cone crusher, and only the assembly process, there are more than 20 process supervision records including cleaning, installation of sealing ring, spindle assembly, installed oil seals and so on.According to the introduction,each test data will be collected and sorted, and recorded in the corresponding database of HPC220 hydraulic cone crusher.

RedStar Machinery is a global supplier of sustainable technology, mining equipment like sand maker and Raymond mill and services for mining, construction, power generation, automation, recycling and the pulp and paper industries. We have about 28,500 employees in more than 50 countries. Our company uses its pioneering spirit to responsibly deliver energy to the world. This purpose transcends all of its operations. The company conducts its business to return maximum value to shareholders while utilizing a wealth of knowledge and resources from its employees and acting responsibly in all communities in which it operates.

06-03-2012 om 02:23 geschreven door annazhao356  

Jaw crusher machine uses motor as its power. Through the motor’s wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of ­fixed jaw plate, movable jaw plate and check plate can be crushed and discharged through the discharging opening.

Hongxing pulverizing and crushing machines are widely applied in mining and construction industry. An increasing number of customers benefit from its superior reliability and low operating cost. Our company enjoys high popularity with its exceptional performance and high quality products, professional technical support and good service. Now she is not only the leading company in the domestic market, but also one of the largest companies that exporting pulverizing and crushing equipment to the overseas markets. We will continuously invent excellent products and offer better services and always benefit our customers. For this reason, Hongxing Machinery is the best choice for you when you are thinking of crushing and grinding machines for particular your needs.

Henan Hongxing Mining Machinery Co., Ltd, the world’s leading stone and mineral processing group, which is specializing in the research, development, and production of industrial crushing and grinding processing equipment and related devices. As a global leading manufacturer of products and services for the mining industry, our products have been exported to more than 167 countries and are widespread used in mining and construction industry. All of our products are very popular in the overseas markets with good quality and competitive price. Being innovative and perfect is our incessant pursuit, and we will continuously sparing no effort to make our products perfect. We have the competence and confidence to fulfill the equipment manufacturing tasks and provide our customers with excellent service.

This kind of equipment, as effective crushing equipment, has been widely applied in many fields, such as, mining, construction, metallurgical, road and railway building, water conservancy and chemistry etc. On the basis of years’ experience and technology development, Hongxing Machinery jaw crushing machine series contains 9 various models, which can fulfill most crushing requirements in the initial stage of crushing.

06-03-2012 om 02:23 geschreven door annazhao356  

The development of crusher industry is quite fast, and there is a vast potential for future development in the heavy industry. At present, the popular and leading crusher in the world mostly develops on the basis of America Newell Corporation. The production and development of crusher are closely linked the scrap steel industry. At the beginning, it only handles the light and thin materials. With the development of recognition about it and the appearance of broken steel’s advantage, various standards’ crusher is developed continuously. The range of application is also more and more extensive. It even can handle the scrapped automobiles and some household appliances.

For increasing the service time of crusher, it is necessary to learn some skills of operational maintenance, so as to accomplish the combination of use and maintenance.

There are some methods of maintenance for crusher as follows:

The first is the preparation work before driving.

●To check jaw plate, bearings, draw bar, supporting plate, spring and triangle belt are in good condition; fasteners are firm; Protective devices are complete; there is no barrier around the moving parts and so on.

●To check the bearings have refueled.

●To ensure no materials are in the crushing chamber before opening the crusher.

The start-up sequence is in turn dust collector, crusher, discharging belt conveyor，charging belt conveyor, Raymond mill, vibrating feeder and so on.

●To adjust the feeding quantity of vibrating feeder, and increase from small materials to big materials, it is usually controlled the height of materials is 4/5 of the jaw chamber height. In addition, it should be also noticed that the largest particle size of materials is no more than 4/5 of the feed opening width. What’s more, when the feed particle size is continuous and uniform, the crusher can brings into play its optimal efficiency.

The biggest business concern for rock crushing machines operators, undoubtedly, has to be crusher maintenance. Being able to properly run and maintain the rock breaker in order to maximize its life expectancy is an essential prerequisite. This will come from knowing the specifications. Being able to understand how much you can do and how to clean the crusher properly are the keys in extending its service life. Simply knowing when things need to be changed or replaced on the crushers will allow for increased life as well.

Many problems that would occur can be prevented if employees are trained properly. Employees can be trained on one-to-one basis or through a group session. Group sessions are more advisable if a new technique or process has to be imparted to employees. Employee training program should be designed in such a manner that it keeps in mind each employee's needs and current skill status. Proper training of employees increases their morale, confident in operating the crusher, their efficiency to work and decreases employee turnover which in turn lead to better working machine and an increase in profit over the long run. Employee training is not a one time job rather it should be done periodically so that each person is well equipped with the correct and updated knowledge of operating and maintenance.

06-03-2012 om 02:23 geschreven door annazhao356  

In old times ,people are using their hands to do everything.And they spends lots of time and energy to finish a difficult thing.Nowadays ,with the development of technology,much more machinery emerged into our life.One cannot deny the fact that machines have made our life easier.As today humans have made so much progress in the use of machines, which are being used in almost in our every part of life, to make our life more easier.

Similarly, manufacturing plants are also playing their major role to manufacture & processed the best product to serve their customers.Talking about the Belt Conveyor System, it is considered to be the most convenient, reliable and the most frequently used component in today’s manufacturing plants. This particular equipment requires all computerized control system. It exactly consists of mainly two pulleys which are supported with rollers and a belt made of rubber on the pulley which helps transfer or takes the particular good from one end to another.

The conveyor belt manufacturers are providing and supplying a high quality belts which are being manufactured by quality raw materials. There are different types of conveyor belts which the manufacturing companies are producing which includes: Packing belt conveyor, Flat belt conveyor, Flat food belt conveyor, High temperature belt conveyor, Oil resistance conveyor belt etc.As depending on the customers which type of belt they want for their company, If talking about the ‘Packing Belt Conveyor’ the manufacturer of packaging belt conveyor makes sure that proper and quality raw materials are being used for this belt conveyor system which consists of electric motor and various other useful tools. This has greatly helped the food industries as the transferring of the bottles and the food items, from processing of the food products till its packaging the conveyor belt has definitely made it easier for the food industries.

Manufacturer plants also created conveyor belts used in various air ports. As according to the research they have found that the longest conveyor belt system in the world is being used in the Dubai International Airport of transferring and handling the bags at approximately 92 km. Also the conveyor belt manufacturers greatest invention of the conveyor belts used in the Elevators. These belts properties include long durability and strong belt. Then comes the ‘ Flat Belt Conveyor’ which is rugged in nature with high durability and used in the manufacturing plants for testing, inspection and package of various products.Many industries are using ‘ Roller Conveyor Belt ‘ which are mostly used for the heavy material handling requirements, which consists of high quality raw material, tools and equipment. ‘ high Temperature Belt Conveyor ‘ which are readily used in the food industries and other cement industries.The main purpose is to satisfy customers by providing them with best product and services.

05-03-2012 om 03:31 geschreven door annazhao356  

In old times ,people are using their hands to do everything.And they spends lots of time and energy to finish a difficult thing.Nowadays ,with the development of technology,much more machinery emerged into our life.One cannot deny the fact that machines have made our life easier.As today humans have made so much progress in the use of machines, which are being used in almost in our every part of life, to make our life more easier.

Similarly, manufacturing plants are also playing their major role to manufacture & processed the best product to serve their customers.Talking about the Belt Conveyor System, it is considered to be the most convenient, reliable and the most frequently used component in today’s manufacturing plants. This particular equipment requires all computerized control system. It exactly consists of mainly two pulleys which are supported with rollers and a belt made of rubber on the pulley which helps transfer or takes the particular good from one end to another.

The conveyor belt manufacturers are providing and supplying a high quality belts which are being manufactured by quality raw materials. There are different types of conveyor belts which the manufacturing companies are producing which includes: Packing belt conveyor, Flat belt conveyor, Flat food belt conveyor, High temperature belt conveyor, Oil resistance conveyor belt etc.As depending on the customers which type of belt they want for their company, If talking about the ‘Packing Belt Conveyor’ the manufacturer of packaging belt conveyor makes sure that proper and quality raw materials are being used for this belt conveyor system which consists of electric motor and various other useful tools. This has greatly helped the food industries as the transferring of the bottles and the food items, from processing of the food products till its packaging the conveyor belt has definitely made it easier for the food industries.

Manufacturer plants also created conveyor belts used in various air ports. As according to the research they have found that the longest conveyor belt system in the world is being used in the Dubai International Airport of transferring and handling the bags at approximately 92 km. Also the conveyor belt manufacturers greatest invention of the conveyor belts used in the Elevators. These belts properties include long durability and strong belt. Then comes the ‘ Flat Belt Conveyor’ which is rugged in nature with high durability and used in the manufacturing plants for testing, inspection and package of various products.Many industries are using ‘ Roller Conveyor Belt ‘ which are mostly used for the heavy material handling requirements, which consists of high quality raw material, tools and equipment. ‘ high Temperature Belt Conveyor ‘ which are readily used in the food industries and other cement industries.The main purpose is to satisfy customers by providing them with best product and services.

05-03-2012 om 03:30 geschreven door annazhao356  

When choosing a conveyor supplier, the process often starts with drawing out a plan of your facility. A diagram of the factory layout with the path of the conveyor labeled can help determine how long it will be and what conveyor components are actually needed. With safety features and conveyor speed factored in, the cost of the overall system and its maintenance needs can be worked out. Research often helps in deciding whether a supplier is quoting an acceptable price.

A conveyor system can be complex and challenging to set up, and finding a conveyor supplier that satisfies all of your needs can also be difficult. Some suppliers are specialized in specific industries, such as robotics, or are capable of providing varying degrees of assistance when buying a conveyor. It is generally important to decide on what you need first, and then find a supplier that can incorporate those needs into its sales strategy. The supplier’s knowledge of the particular industry, the skills of its staff, and whether it offers full systems or specific conveyor components are usually important facts to know. Of course, it's important for conveyor belt and also for ball mill, mobile crushing plant and other machinery equipments. Here, we just discuss the belt conveyor.

Businesses that use conveyors often rely on them for day-to-day operations and for processing each product. A conveyor supplier that allows you to communicate your specific needs is usually the best option. The supplier can opt for online quoting or be willing to speak directly about specific projects. If the company wants to learn about the specific conveyor system you need and are prompt each time they are contacted, then this is generally a good sign. In addition to how the supplier communicates with the customer, also judge based on their promotional strategy and advertised capabilities.

The fewer modifications to a conveyor system that need to be done after it is purchased, the less you typically have to spend later on. A conveyor supplier that offers a specific conveyor just for the application is usually best. If the supplier insists on selling just a generic system, it may be best passed on. The help of support staff is generally important, as it is in any sales setting.

Regardless of the types of conveyors, dealing directly with the supplier is often the best strategy. Sometimes the more distributors involved, the higher the price of a conveyor system. Also, there can be greater chances of misinformation leading to mistakes in conveyor choices. How you manage the relationship with a conveyor supplier can also be important; figure out how to manage the project and communicate at the beginning of the process for the best possible results.

05-03-2012 om 03:30 geschreven door annazhao356  

In this new era of modern-trading, we’ve huge departmental stores nearby where we get to purchase almost everything under one roof. There, you must have seen the cold storage units where you’ll get packed raw food. Keeping the food fresh isn’t only the cold temperature, but also the food vacuum packing technology holds its freshness. Therefore, if you’ve no time to cook or unexpected visitors have visited your place, then these packets containing raw food are good and delicious options you’ve in hand if it’s about eating or serving scrumptious meals.

As we know, mining machinery is the pillar industry, and with the development of construction industry, markets for jaw crusher, Raymond mill, cement production line and stone crushing plant are expanding faster to make greater profits. As there is a huge variety in eatables we’ve. Similarly, there is a wide array of food packing machine, packing eatables of varied types. Now, let’s first attribute towards the biscuit packing machines that are (of course) meant to pack the mouth-watering biscuits and cookies, for your tea/coffee time. These machines are very intelligent and maintain a perfect temperature and precision while packing the biscuits. This assures utmost freshness and crispiness of the food. Also, it turns the things easier for the manufacturers when it comes to monitoring the daily factory output as well.

Another popular machine in this category is the bagging machine. Yes, this particular machine is frequently used (mainly) in the Chinese food processing factories. Here, the food is packed in bags, printed pouches and sacks. Such machines are commonly used in the packaging of milk powder, flour, sugar, rice etc… After that closing machines are employed to close the pouches and bags with a metal wire.

Most food need packaging to keep its freshness or something others,then the demand for packing machines is rising tremendously. For instance, if we talk about the food and beverage industry, then there are myriad packaging machines that are only intended to pack the food properly. Food is an item which is highly perishable, thus, it’s important that the food is packed perfectly and must have a long shelf life. And of course, there are numerous food packing machines available to do this job.

When it’s all about packing the drinks and syrups, then capping machines comes into effect. As the name suggest, these capping machines are particularly meant to place air-tight caps on the bottles to maintain the freshness of the liquid inside. It plays a major role in the soda manufacturing companies.

05-03-2012 om 03:30 geschreven door annazhao356  

It is not legal to drive a commercial vehicle when the driver does not possess a commercial driver’s license (CDL). This license is actually divided into classes which can give restrictions to the kind of vehicles driven. The standard may differ a little in every state; however, the federal guideline states that a driver who has a class A license can operate a combination that is beyond 26, 001 pounds.

For example, you want to work in a mining machinery company to be the driver. If you don't pass the Class A driver test to get the CDL, the company won't employ you for security factors. Because the machinery is very expensive and huge, such as stone crushing plant, vibrating feeder, cement plant and vibrating screen. All of them are manufactured and purchased with high costs. So the requirement of drivers' quality is very serious.

All jobs and all types of work have “hazards of the job” attached to them. Truck driving is no different in this respect. However if the truck driver is fore-warned about these common problems then he and his employer should be able to provide information and advice that will help him to recognize symptoms and issues as they arise.

A class A CDL is obtained by a person who can read, drive and is at least 21 years of age. It will not be possible to obtain such license without meeting all of these requirements. A driver who enrolls himself in a driving school will be made aware of the differences between the CDL classes. Such differences are much more related to the weight of the vehicles a driver can carry. Those who have a class A CDL can choose any vehicle combination that he wants. These vehicles can have a gross weight rating of over 26, 001 pounds if the gross weight rating of the one he is towing is more than 10,000 pounds.

A driver can obtain a class A CDL when he passes written and skill tests. In the skills test, he should show a high level of knowledge on procedures that should be undertaken before he enters the vehicle and while he is on the road. He should show these skills using a Class A vehicle. The knowledge and skills to pass the test will be taught by a driving school so it is a good idea to get a driving course from them.

It is also likely for the Class A truck driver to have additional endorsements. These are given to him as privileges for passing optional exams. Say, a certain endorsement enables him to haul a tank. The absence of this endorsement will prohibit him from doing such job even if he is able to meet the standards for units and weights.

The prospective Class A driver must equip himself with the necessary skills and knowledge to makes sure that he will pass the required tests to obtain a Class A CDL. This will be possible with the reliability of a driving school when it comes to driving lessons.

Successful truck rivers have good planning capabilities. You should plan the best route and time to pick up and deliver goods. Scheduling in maintenance, rest, relaxation, and social time is also important in order for your schedule to be realistic. Financial planning is the other key to success. Operation costs should be diligently calculated and scrutinized so that you know how much you are spending and earning. This will help you keep track of how much you are earning. With that information at hand, you will be better positioned to set personal and business goals for yourself as a truck driver.

05-03-2012 om 03:30 geschreven door annazhao356