Injection Molds
The injection mold is essentially a closed mold (the mold is closed without any material in it). After the application of pressure to close the mold and hold it tightly clamped against injection pressure; the molten plastics material is forced into the closed cavity by a source of pressure other than that which caused the mold to close. The melting of the plastics material in the injective machine cylinder is called plasticiziong. The runner clearly shows as the cross-bar in front of the operators left arm. One gate is indicated by his left thumb. The molten material passes through the runner and gates on its way into the cavity. The proint at which the molten plastics material passes from the runner into the cavity is called the gate. You will note that we refer to "flowing into the cavity." This cavity means the space between the male section and the female section in to which the molten plastics will eventually form into the desired shape and detail. The point at which the core and cavity separate or move apart when the mold is opened is called the parting line. The different manners in which the material can be introduced into the cavity through a gate or gates in various locations. Each location has its advantage and disadvantages. The proper choice of gating is one of the essential fundamentals of mold engineering that must be mastered by the mold designer. Injection molds are used for molding either thermosetting or thermopastic materials. In the case of thermosetting material the mold is run hot. In the case of thermoplastic material the mold is run cold. Ranges of temperature would be meaningless here because of the very wide range, meaning several hundred degrccs between the different types of the same classification of materials. The disigner should read every date sheet and manufactuing technique book that he can obtain from the manufacturer of the raw material that will be molded in the mold under diesign. Mold Sourceswww.mold-sources.com
About Video Door Phone System
The video door phone system of Huanfeng are featuring in there variety ,reliability ,novelty to make your daily life more convenient with superb taste. Manufacturer of mobile wireless video door phone system, consumer electronic goods, home security subsystem integrated equipment, small size B/W TV ,small size COLOR TV, MULTI-LANTERN TV and electronic Premium items.
What is Video door phone, and how it works?
You can use video door phone view and talk to visitors from inside your home, then let them inside with the press of a button! This mobile wireless video door phone system provides an elegant, self-contained package for entrance monitoring. When a visitor presses the button on the door unit, the monitor screen turns on and a chime tone plays. To converse with your visitor, simply pick up the handset and talk. You can even let your guest inside by pressing the "open" button to unlock the door.
·2.4GHz video transmission, 1.8GHz audio transmission
·Up to 20 billions passwords, thus accidental start-up by same frequency interference can be avoided
·Two marimba tones announce visitor at door
·Four channels can be switched for the best picture and voice
·The transmission distance with indoor phone: 100m in outdoor
Shenzhen Huanfeng Industrial, Video door phone manufacturer
www.xiadiantv.com
|
